Fluorescent Plus Application Guide
Please follow this procedure to safely and easily mark any item and determine if it was actually cleaned. With the Walsh One Glove Method, you will safely re-use your fluorescent dauber without any risk of cross-contamination.
Before the room has been cleaned
- Put on a clean medical glove.
- Touch the marker to one fingertip.
- Now, touch that finger to the area you wish to mark.
- Repeat steps 2 & 3 with each finger, touching a different item or surface. NEVER use the same finger twice for fear of contamination
- Using your “Walsh Fluorescent Plus” App, choose each area that you marked and select “Marked Fluorescent"
After the room has been cleaned
- Return to that room and touch the Fluorescent Marked Widget on your device.
- Select this room and you will see each of the items that you had marked.
- Using a fluorescent light (supplied), illuminate each item to see if the fluorescent marking has been wiped away.
NOTE: depending on the surface, amount applied, and drying time there may still be some fluorescent ink residue even if the surface was cleaned. Use your judgment.
- Score each item as Pass or Fail in your Walsh Fluorescent Plus App.
10.“Complete” the inspection when you are finished.
Click here for detailed instructions on how to use the Walsh QA Fluorescent Plus system.
Summary:
With the Walsh One Glove Method, you will safely re-use your fluorescent dauber without any risk of cross-contamination.