ATP Setup

Ready to set up ATP EnSURE Touch ATP device? Here's how!

STEP 1

Put on the Protective Cover

EnSURE Touch is designed to withstand everyday use and is equipped with a shatterproof screen similar to that used on premium smartphones. We recommend using the complimentary protective case, which comes inside the box, along with the velcro hand strap for easy carrying. To install the hand strap, thread it through the openings on the back of the case and attach the velcro together on the inside. To put the case on, start by inserting the top portion of EnSURE Touch, where the power button is, into the top of the case before inserting the bottom half.

STEP 2

Power on EnSURE® Touch

Plug your EnSURE Touch into a wall outlet using the cables included in the box and let it charge for 15 minutes. Tap the power button once on the top left of the screen to power it on. If you see the screen illuminate slightly, then the instrument is powering on and you do not need to press the power button again. If it’s not turning on, long hold the power button for 15 seconds.

Note: Hygiena® charges the EnSURE Touch in accordance with lithium battery shipping requirements, but the battery may lose charge during shipping and storage. EnSURE Touch is capable of turning on and operating while the battery is drained, as long as it is connected to a power source.

STEP 3

Select Language

STEP 4

Select Time Zone

STEP 5

Select Date and Time Format

STEP 6

Select Industry

STEP 7

Connect to Wi-Fi

If the setup did not prompt you to enable Wi-Fi you can do this from your home screen. To enable Wi-Fi, swipe down from the top of the screen to open the menu. Touch the dotted square at the top right corner of the screen. Touch the Wi-Fi icon. Touch the slider, to turn Wi-Fi on.

Select your Wi-Fi network and enter the password.

Note: an internet connection is only required for software updates. An internet connection is NOT required for testing.

STEP 8

Check for Software Updates

From the home screen, open the Settings app and touch “About”. Then, touch the “check for update” button. If a new software update is available, the update will start. The software on EnSURE Touch is designed by Hygiena’s in-house software & development team, and we release software updates regularly (as often as every other week) with new features and enhancements. Just like your phone or computer, keeping your software up to date is critical to ensuring your EnSURE Touch performs at its best, so make sure you connect to Wi-Fi and check for software updates.

Summary:

Follow the above steps to set up your EnSURE Touch ATP device.